Promo 🧨 Sailing Itiwit, Fast And Easy High-Pressure 20 PSI Triple-Action SUP Pump 🔥

The triple-action high-pressure pump is designed to easily inflate SUPs to pressures of up to 20 PSI. The structure with 2 compression tubes is powerful and comfortable.

Our team of enthusiasts recommend this product to easily and quickly inflate your inflatable stand-up paddleboards to high pressures of up to 20 psi

SUP inflation tips

1/ Stand on level and solid ground
2/ Screw the hose onto the pump
3/ Connect the hose to the SUP (valve raised)
4/ Set to mode 1: double action on 2 chambers.
This mode lets you quickly increase the volume to 1-5 psi
5/ Set to mode 2: single action on 2 chambers.
This intermediate mode lets you quickly increase the pressure to 10 psi
6/ Set to mode 3: single action on 1 chamber
This mode lets you inflate to high pressure up to 20 psi.
7/ Inflate to the recommended pressure of the SUP

Storage tips

Roll up the hose, do not fold it.
Do not stand on the pump or the hose.
Clean off any sand, it can damage the seals.

DIMENSIONS

Height: 25.2″
Width: 13.4″
Depth: 4.3″
Hose length: approx. 47.2″
Weight: 3.3 lbs

Mode 1: volume with dual action: 5.4 L
Mode 2: volume with single action 2 chambers: 3 L
Mode 3: volume with single action 1 chamber: 1.3 L

Composition

Chassis : 100.0% Polypropylene
Bar : 100.0% Aluminum
Tube/Valve Connector : 70.0% Polyethylene Low Density, Tube/Valve Connector : 30.0% Ethylene Vinyl Acetate
Base : 100.0% Polyacetal
Accessories : 100.0% Acrylonitrile butadiene styrene

Easy to use : 3 progressive modes of operation: 1/ volume 2/ volume and pressure 3/ pressure

Power : Robust design with a dual chamber and stable base. Wide handles.

Measurement settings : Built-in 3-20 psi pressure gauge in the handle.

Durability : Robust hose and silent during inflation.